4316 H

type 
Corrosion and temperature resistant electrode for AISI 304H types Cr-Ni steel
applications 
This electrode is suitable for welding un-stabilized austenitic stainless steel with low carbon content, suitable for working temperatures up to 730°C.
Properties 

Compare to standard 4316 Ti the weld deposit has much higher temperature scale-resistance up to 800°C due to the increased carbon content.

classification
AWS 
A 5.4: E 308H-16
F-No. 5
EN ISO 
3581-A: E 19 9 R 12
FM5
DIN: W.Nr. 
1.4948
DIN 
8556: E 19 9 R 23
Suitable for 

UNS S30409 : AISI :304H W.Nr : 1.4948 UNS S32109 : AISI :321H W.Nr : 1.4941 UNS S34709 : AISI :347H W.Nr : 1.4961, 1.4300, 1.4301, 1.4303, 1.4306, 1.4308, 1.4311, 1.4312, 1.4371, 1.4541, 1.4543, 1.4550, 1.4552, 1.4948

welding positions: 
Weld deposit weight %

C

Mn

Si

Cr

Ni

Mo

<0.05

0.5-1.0

<1.0

18-20

9-11

mechanical properties

Heat

RP0,2

Rm

A5

Impact Energy (J) ISO-V

Hardness

Treatment

(N/mm2)

(N/mm2)

(%)

20°C

-40°C

-60°C

HRc / HV

AW

>350

>550

35

70

AW: as welded
redrying temperature 
Redry if necessary at 300°C/2hr (usually not needed)
Paramètres de soudage / emballage

Welding Parameters

Packing

D (mm)

Length (mm)

Current (A) DC+/AC

kg / can

kg / 6pack

kg / 1000

2.0

300

40-60

2.4

14.4

12.2

2.5

300

50-90

2.5

15

18.8

3.2

350

80-110

2.8

16.8

35.6

4.0

350

100-150

2.8

16.8

54.0

Disclaimer: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.